Automotive Repair & Protective Care Products

Product Details:

Auto Kit is a two part special set consist of a high viscosity cyanoacrylate adhesive and activator set which is used especially on wood, rubber, most plastics, small glass piec e s, leather and other common substrates in the auto mobile.

• Very fast bonding,
• High adhesive strength
• Thanks to its high viscosity formula, it can be used in vertical places without pour and splash,
• Activator makes it possible and incredibly fast to bond even porous surfaces,

• It is suitable for the bonding of a very wide range of materials, including a cidic surfaces and some porous ones, where rapid bonding times are required.
• Repair of the wood, rubber, most plastics, small glass pieces, leather and other common parts in the automobile.
• Perfect company in daily life for most bonding purposes.

Additional Information:

• Item Code: 706

Product Details:

Eliminates the need for an immediate tyre change, sealing and inflating your tyre within seconds.

• No need for lifting- jack or any other tools.
• Finds the hole in the tyre and seals it
• Water based.
• Can be cleaned easily with the water after application
• Does not harm the tyre valve
• Instantly repairs punctured  tyres, without removing the wheel
• Inflates the tyre (up to a pressure of 1,2 to 2,5 bar), so that one can immediately continue to drive at a moderate speed.
• Harmless to tyres and wheels.

• For cars, motorcycles, caravans and trailers.
• For tubeless tyres or tyres with inner tubes.

Additional Information:

• Item Code: A-107

Product Details:

Powerful cleaning aerosol is used to remove oil, grease, dirt and dust from brakes and clutches, aiding in the elimination of brake squeal and clutch slip caused by glazing and contamination. Brake c

• Effectively removes the deposits like leaking brake fluid, grease, oil and hardened contaminations.
• Eliminates dust from brake and clutch parts.
• Reduces disc-brake squeal and clutch chatter.
• Can be applied without disassembly, saving time and reducing maintenance costs.
• Evaporates quickly.
• Leaves no residue.
• Excellent penetration
• Stable, non-staining and non-corrosive to metals.
• Aerosol is equipped with a 360° (upside-down) spray valve and extension tube for added convenience.

Perfect for cleaning and degreasing:

• Brake linings
• Drums
• Cylinders
• Brake shoes
• Disc brake pads
• Discs
• Wedge brakes
• Springs  Calipers
• Clutch discs

Additional Information:

• Item Code: A-110

Product Details:

A115 Engine Cleaner Spray is an excellent product developed against engine oil, grease and stubborn dirt.

• It will not damage any parts in engine.
• Provides a brilliant view and protection to the engine besides the cleaning,
• Thanks to its superior content, it offers to penetrate and remove the stubborn dirt, oil and grease on the engine.
• Contain ozone-friendly propellants that do not harm the environment.
• Harmless for electronic circuits.
• It easily reaches, penetrates and cleans the most difficult areas.
• Does not damage rubber, plastic and painted surfaces,
• Does not contain silicone,
• It contains citrus essences.

• Car Engines,
• Motorcycles,
• Machines,
• It is suitable for all types of engines, such as lawn mowers.

Additional Information:

• Item Code: A-115

Product Details:

Specially developed for cleaning, treating and protecting tyres as well as enhancing their appearance in one process. Enhances the appearance of weathered tires by restoring the rubber surface

• Easy to use.
• Does not contain flammable solvents.
• Non-acid formula.
• Self-acting foam removes residues and dirt.
• Makes tires look like new.
• Cleans and cares.

Akfix Tyre Cleaner & Polish Foam is suitable to use on all kind of vehicle tires like bicycles, motorcycles, automobiles, minibuses, buses, trucks, lorries etc.

Additional Information:

• Item Code: A-117

Product Details:

Akfix HT300 is a high-performance silicone sealant developed for sealing, bonding and repairing works where heat resistance is required. It is an ideal sealant for high temperature construction applications. It reacts with atmospheric moisture to produce a tough, elastic silicone.

• Excellent heat resistance after curing up to 250 °C permanently and up to 300 °C temporarily.
• 100% silicone,
• Remains flexible at low (-40 °C) and high (+250 °C) temperatures,
• Resists to mechanical enforcement after curing,
• Acetoxy cure, RTV silicone,
• Will not crack, shrink or become brittle,
• One component.

• Sealing and bonding applications in automotives,
• On heating systems and ovens for sealing / tightness,
• Sealing and bonding in stoves,
• Gaskets in pumps and motors,
• Sealing chimneys,
• Other bonding and sealing applications where parts must perform at high temperatures.

Additional Information:

• Item Code: HT-300

Product Details:

Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

• One component formulation
• Good non-sag properties
• Short cut-off string
• Cold application
• Fast curing – Rapid strength development
• High mechanical performance
• High Modulus
• High initial bond strength
• Can be overpainted

It is especially useful in bonding windshield glass into automotive frames

Product Details:

Polyurethane Windshield Adhesive Primer is a BLACK Primer specifically designed for the ceramic band on vehicle glass. It ensures the complete protection of the adhesive by creating a barrier against harmful UV rays which can lead to the degradation of the adhesive. It is also an adhesion promoter. To be used in conjunction with Cleaner/Activator.

• One component formulation
• Cold application
• Protection against UV
• Promotes the adhesion power significantly

The surfaces to be treated must be perfectly clean, dry, dust and grease free. Application of Polyurethane Windshield Adhesive Primer can only take place once the thorough cleaning of the bonding area with CLEANER/ACTIVATOR has been completed. Shake bottle well before application (for at least 1 min.) till the noise of the metal balls contained in the bottle can be heard. Apply product using a felt applicator. Close immediately after use as product evaporates very quickly. Ensure that primer is tack-free dry before proceeding.

Product Details:

MS Polymer Windshield Adhesive is an isocyanate-free, thixotropic, high modulus, primerless windshield adhesive based on MS Polymer technology. It provides quick drive-away time and easy application without pre-heating for vehicles.

• Easy application without pre-heating
• High initial tack; quick drive-away time
• Primerless application,
• Eco-friendly, free from isocyanate and solvent
• Very low VOC content and odor
• UV and extreme weather resistance

• Ideal for glass replacement in automotive and marine repair, such as windshields, rear glass, side glass and other stationary glass
• Sealing and bonding of sunroof applications
• Sealing and bonding of heavy metal materials for container construction
• Suitable for metal, steel, aluminum, glass, copper, zinc and fiberglass

Product Details:

• No need for lifting- jack or any other tools.
• Finds the hole in the tyre and seals it
• Water based.
• Can be cleaned easily with the water after application
• Does not harm the tyre valve
• Instantly repairs punctured tyres, without removing the wheel
• Inflates the tyre (up to a pressure of 1,2 to 2,5 bar), so that one can immediately continue to drive at a moderate speed.
• Harmless to tyres and wheels.
  
  

• For cars, motorcycles, caravans and trailers.
• For tubeless tyres or tyres with inner tubes.