Product Details:
Brand | Akfix |
Tensile Strength | 5 (MPa) |
Elongation | 250% |
Hardness | 70-75 (Shore A) |
Pull off Strength | concrete 4 steel 5 (N/mm 2 ) |
Density | 0.99-1.03 (gr/cm 3 ) |
Tack Free Time | 3-5 (min) |
VOC Content | 0% |
Solid Content | 100% |
Gel Time | 1-1.5 (min) |
Chemical Structure | Iso component Isocyanate (MDI) Prepolymer, Amine component Amine Resin |
AKF¿¿X JH 1070 is a self-leveling, 100% solid, flexible, two component, 1:1 ratio, rapid curing polyurea elastomer joint and crack filler. Designed for 10 – 15% movement of an installed joint width. Cures rapidly and consistently in applications ranging from -20 °C to 60°C. Applications can be reopened to vehicle or foot traffic in 1 hour. Recommended time of cure of concrete minimum 30 days prior to installing joint filler or joint sealant.
Properties:
Additional Information:
Product Details:
Brand | Akfix |
Tensile Strength | 18 MPa |
Density | 0,99-1,03 (gr/cm 3 ) |
Elongation At Break | 350% |
VOC Content | 0% |
Impact Resistance | Class III |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm 2 ) |
Solid Content | 100% |
Gel Time | 5-10 sec |
Tack Free Time | 15-25 sec |
Recoat Time | 0-12 hr (without pretreatment) |
Modulus | %100 elongation 10 MPa,%300 elongation 15 MPa |
Hardness | 40-45 (Shore D),90-95 (Shore A) |
Tear Strength | 50 (N/mm) |
Taber Abrasion | 30 (mg) (H22,1000 cycle) |
Additional Information:
Product Details:
Brand | Akfix |
Chemical Structure | A MDI Prepolymer B Amine Resin |
Modulus | %100 elongation 10 (MPa) |
Elongation at Break | 350% |
Hardness | 40-45 (Shore D),90-95 (Shore A) |
Tear Strength | 50 (N/mm) |
Impact Resistance | Class III |
Thermal Resistance | -30 deg C-100 deg C |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm 2 ) |
Approval to Food Contact | Suitable |
VOC Content | 0% |
Solid Content | 100% |
Gel Time | 5-10 sec |
Tack Free Time | 15-30 sec |
Recoat Time | 0-12 hr (without pretreatment) |
Post Cure Time | 24 hr |
Density | 0,99-1,03 (gr/cm 3 ) |
Tensile Strength | 18 (MPa) |
AKFIX POLYUREA FA 1044 is a very fast curing, two component, aromatic, flexible, pure polyurea system coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This product has been approved for potable water & food contact and especially designed waterproofing for potable water tanks and pipes. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties:
Additional Information:
Product Details:
Tensile Strength | 16-18 (MPa) |
Brand | Akfix |
Chemical Structure | A MDI Prepolymer B Amine Resin |
Hardness | 40-45 (Shore D),90-95 (Shore A) |
Tear Strength | 50-55 (N/mm) |
Taber Abrasion | 90 (H22,1000 cycle) (mg) |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm 2 ) |
Reaction to Fire Class | E |
VOC Content | 0% |
Solid Content | 100% |
Gel Time | 5-10 sec |
Tack Free Time | 15-25 sec |
Recoat Time | 0-6 hr |
Density | 0,99-1,03 (gr/cm 3 ) |
Modulus | %100 elongation 10,%300 elongation 15 (MPa) |
Elongation at Break | 350% |
Akfix Polyurea FR 1044 is a very fast curing, 2-component aromatic pure polyurea system, 100% solid, flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. With its fire retarding ability, it has resistance against ignition combined with self- extinguish feature. Especially designed to protect and coat concrete, metal, wood, ceramic, geotextile and PU foam substrates. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment. As the product is not sensitive to moisture and heat, it can be applied in wide variety of weather conditions. It can be used safely in exterior and interior environments.
Properties:
Additional Information:
Product Details:
Color | White,Black,Grey,Yellow and any RAL Color |
Brand | Akfix |
Solid Content | 100% |
Density | 0,99-1,03 (gr/cm 3 ) |
Elongation at break | 350% |
Tensile Strength | 16 (MPa) |
Shelf Life | 9 months |
Chemical Structure | A MDI Prepolymer B Amine Resin |
Tack Free Time | 15-30 sec |
Recoat Time | 0-12 hr (without pretreatment) |
Post Cure Time | 24 hr |
Modulus | %100 elongation 10,%300 elongation 15 (MPa) |
Hardness | 40-45 (Shore D),90-95 (Shore A) |
Thermal Resistance | -25 deg C-120 deg C |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm 2 ) |
Surface Resistance | 0,5*10 9 (ohm) (fullfills the requirement for coating systems) |
Reaction to Fire | Class E |
Co 2 Permability | SD = 76,45 m |
Abrasion Resistance | 200 (H22,1000 cycle) |
Bond Strength by Pull Off | 2,0 N/mm 2 |
Thermal Shock Resistance | Resistant (200 deg C in 1 min. ) |
Consumption | 1,00- 1,1 kg/m 2 /mm |
VOC Content | 0% |
Additional Information:
Product Details:
Brand | Akfix |
Chemical Structure | A MDI Prepolymer B Amine Resin |
Modulus | %100 elongation 10,%300 elongation 12 (MPa) |
Elongation at Break | 375% |
Hardness | 35-40 (Shore D),90-95 (Shore D) |
Tear Strength | 40 (N/mm) |
Taber Abrasion | 100 (mg) (H22/1000 cycle) |
Impact Resistance | Class III |
Thermal Resistance | -30 deg C-100 deg C |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm 2 ) |
VOC Content | 0% |
Solid Content | 100% |
Gel Time | 5-10 sec |
Tack Free Time | 15-30 sec |
Recoat Time | 0-12 (without pre-treatment) |
Post Cure Time | 24 hr |
Density | 0,99-1,03 (gr/cm 3 ) |
Tensile Strength | 15 (MPa) |
AKFIX Polyurea 1045 is a very fast set, rapid curing, flexible, two component, aromatic pure polyurea coating system derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. The system is designed as a waterproofing and floor protective coating for concrete, metal, wood, ceramic, geotextile and PU foam substrates. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties:
Additional Information:
Product Details:
Brand | Akfix |
Chemical Structure | A MDI Prepolymer B Amine Resin |
Tack Free Time | 45-60 sec |
Density | 1.05-1.08 (gr/cm 3 ) |
Tensile Strength | 16 (MPa) |
Elongation at Break | 400% |
Gel Time | 15-30 sec |
Recoat Time | 0-12 hr |
Solid Content | 100% |
Abrasion Resistance | 33 (mg) (H22,1000 cycle) |
Hardness | 40-45 (Shore D) |
Pull off Strength | Concrete 2,5 Steel 6 (N/mm2) |
VOC Content | 0% |
Akfix Polyurea AL 1070 is a %100 solid, fast curing, 2 component, UV resistive, aliphatic pure polyurea system. Its formulation is designed for maintaining high color stability and preventing discoloration where surfaces are exposed to sun light continuously. While it can be directly used on most surfaces, it also can be used as a top layer on epoxy, polyurethane and polyurea. After fully cured, it forms a coating material with high tensile strength and abrasion resistance. For protection and coating purposes, it can be applied on concrete, metal, wood, ceramic and PU foam. It can form strong films in wide variety of thicknesses. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment.
Properties:
Additional Information: